Asparagus' s12 build

A place for your current or past S12 projects, detail your build & modifications, and share them with the community.
Post Reply
asparagus
Posts: 74
Joined: Wed May 20, 2009 7:39 pm

Asparagus' s12 build

Post by asparagus »

I dont, but if you take off your hood and look at the hinges, it will make perfect sense as to where you cut. I just cut it enough that the hood stops at 90 degrees and when I lift it up, I pull the hood bar out from the radiator support and hook it into the side as you can see
Last edited by asparagus on Sun May 23, 2010 9:06 pm, edited 1 time in total.
james
Posts: 2823
Joined: Wed Feb 13, 2008 11:30 pm
Location: Lyndoch 5351, SA
Name: James
Car: Nissan Gazelle RS-X

Asparagus' s12 build

Post by james »

I see.

Hmm, I have a couple spare pairs.. will try this tomorrow ;)

Thanks.
User avatar
swampdonkyy
Posts: 1267
Joined: Sat Nov 15, 2008 2:46 pm
Location: Morphett Vale, Adelaide
Name: Brad
Car: S12 SILVIA FISCO

Asparagus' s12 build

Post by swampdonkyy »

Good work Henry ;) Love the bonnet mod
asparagus
Posts: 74
Joined: Wed May 20, 2009 7:39 pm

Asparagus' s12 build

Post by asparagus »

thanks man! it's proven to be a super useful mod

GF got me a nardi for my bday! 340mm nardi classic

Image

Image

Image

Image

Image

Image

Image

Image
Last edited by asparagus on Mon May 31, 2010 4:59 pm, edited 1 time in total.
User avatar
Fury-S12
Posts: 3093
Joined: Mon Aug 14, 2006 6:22 pm
Location: Tasmania

Asparagus' s12 build

Post by Fury-S12 »

agree completely with dean this car takes the crown for best street goin 12 out there its definitely the benchmark to aim for

keep up the good work henry
User avatar
RannerZ
Posts: 803
Joined: Mon Oct 20, 2008 1:20 pm
Location: Adelaide SA

Asparagus' s12 build

Post by RannerZ »

what size and offset are the wheels you runnin?
ImageFJ20 YO!
asparagus
Posts: 74
Joined: Wed May 20, 2009 7:39 pm

Asparagus' s12 build

Post by asparagus »

15x7-1(plus an 8mm spacer to clear brakes)
15x9-27

Yeah, I know it's lame. haha. I'm still on the hunt for some x8's

copied this over from my blog--

S12 AND BUTTONWILLOW RACEWAY
Image

Man, what a fu**ing trip! I had a BLAST, thanks Son for hosting such a dope event! There was so much seat time and it was really chill.

Driving there wasn't too bad, until the whole tread of a tire flew into my car. I was driving close behind a friend and it just went right under him and flew out right into my lip, smashing off one of the lip supports and a few zipties so it was saggy the rest of the day. And right before my group went out for their first session, I find out that the tire bent my exhaust up enough that it grinded against an axle and made a hideous noise. Luckily, it was metal to metal and it didn't do any real damage. I spent a good half hour fixing that and then hit the skid pad.

After drift-o-cross last September, I didn't think I was really ready for the track. It's intimidating man! During drift-o-cross, I wasn't really feeling the car and spun out more often than I liked. But after the new tension rods and alignment, the car felt like a whole 'nother car all together! I went out and did a couple figure 8's and decided to hit the track with group C immediately since I missed my group. Went around for the cold lap, and it's pretty scary at first(especially phil hill, jesus) but right after the cold lap I clutch kicked into the zorro(check the track layout) and the car felt great. The seemingly narrow track felt much wider after the confidence kicked in and I got that GROOVE ON.

With the new caster (6ish, stock is 4 for s12), the steering return was really great. The car responded super well and I started trying to connect the turns in the zorro. I also power overed a lot in the beginning, only to realize how dope some clutch kicking would do. Matt9000 sat in the car for a couple sessions and helped me master clutch kicking the entire sweeper at the bottom of west loop with a single clutch kick (with KA!). I revved the crap out of this thing, I hit the rev limiter like all day! (thanks again Hung for wiring up that digi tach, haha so I know now)

The car was also really, really reliable. I lasted longer than a lot of the dudes at the event. It was 95F there and my car stayed at a consistent 185F the entire time, no spikes. I dirt dropped a lot and kept sliding until I hit pavement again and also slid into a lot of burms, making the front of the car bounce all over the place but the car just kept sliding and handling like a champ. Every time I hit the dirt and rocks, I'd feel it under the car and immediately eyeball the oil pressure gauge.

OIL PRESSURE?

GOOD.

And kept it going.

It was great to finally reap the benefits of all my work/time/money. The car was really amazing this time around. The tires lasted forever too! I really didn't expect that with -5.5 camber and 1.3 total toe-in the rear. I started the day with some super DEAD 195/50/15 federals and that lasted me a good two sessions, could have lasted one more. And the entire rest of the day I was on my semi-new 205/50/15 falken ziex 512's that I had bought before JCCS last year. I drove the dick out of those until I heard some flapping noises against the car and that was pretty much the entire day.

The driving was pretty much all day from 9-5pm and it was really casual with a ridiculous amount of seat time. There were groups but eventually people just went out whenever they wanted to. Track etiquette was also good and all the guys present were good peoples. Lots of bromo times and just all around too much fun. Can't wait for the next event!

On another note, I was really, seriously planning on swapping the rear end to a ford solid axle. But after how well the car performed at buttonwillow, fu** it. Even the tire wear was great so I honestly won't even bother. Money better spent on tires!

There was NO MEDIA there, pretty bummed. I gave my camera to Trinh and Yuta though and they got some pics from a spectator area but only from a couple angles. I think there might have been a little video with point and shoots so I hope stuff like that eventually floats around.

I DIDN'T RAISE MY CAR! I was surprised how well it drove, no problems whatsoever at my height. The PBM coilovers too! Bouncy and horrid on the street but rides like butter on the track. It's like night and day.

Image

rubber from full lock after first sesh
Image

Image

Manny's car getting super dug in
Image

Alex's car also getting dug in... Hahaha!
Image

Yuta bro checking it out
Image

Of all the rest of the dry dirt Alex, jesus
Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

hit the burm and keep going man!
Image

Image

Bryant getting stuck. this guy was crazy on the track
Image

Image

Image

And the falken ziex 512's that lasted me most of the day, not bad!
Image

end of the day
Image


and incredibly tired, home. car made it in one piece and gave me absolutely no problems! Damage was pretty minimal too, a ton of dirt and rubber, lip support, lost a couple interior pieces, snapped a sunroof cover bracket, and the rear pleather from my hatch is like falling off.

And you can probably tell how excited I am with all those exclamation marks, I'm stoked on just talking about it!
Image
User avatar
RannerZ
Posts: 803
Joined: Mon Oct 20, 2008 1:20 pm
Location: Adelaide SA

Asparagus' s12 build

Post by RannerZ »

not that lame man. The rears look dope but fronts could use some more poke.
You still have more offset than half the people down here.
im always on the hunt for new wheels. Wether or not I can afford them is a different story.
ImageFJ20 YO!
asparagus
Posts: 74
Joined: Wed May 20, 2009 7:39 pm

Asparagus' s12 build

Post by asparagus »

Thanks man! Yeah, the front's could use a lot more poke. I just need the right size to get a little stretch going. I don't wanna go any smaller than 195 and that's somewhat square on the x7's so just gotta wait until someone is willing to sell some x8's for a FAIR PRICE. I got that x9 pair in the rear for only 600 bucks shipped(deal of a lifetime) and I can't find a pair of x8 for less than 1000 so bahh
Post Reply

Return to “Projects & Build Threads”