S12Silvia.com

Maybe i should keep an eye out for specials coming through on wheels for you Rog as quite often we see prices of around <$150.00 ea....

Strange that your wipers would lift at 170, mine dont do anything at up to 200. I should say did, because I now only have a single wiper. Its easy to do, and if you fit a 5cm longer blade you will have almost perfect vision for the driver side. Passenger side does suffer however.

Lister wrote:Maybe i should keep an eye out for specials coming through on wheels for you Rog as quite often we see prices of around <$150.00 ea....

I'd apreciate that Glen. I'd like to keep to the Enkie RS-E & Volk GT-C style as they suit the car. I'm no fan of the modern trinkets or the Watanabe RS-8.

yeah that's odd that the wipers lift and start
mine dont do anything at that sorta speed

but congrats on the new lap times!
and good luck shaving them down!

Hey Roger, i have a set of R32 gts-t 4 spots with DBA4000 rotors i can sell you that will fit under your 16's, same pad size as r33 just different rotor size 280mm instead of 296mm.

I already have the R33 GTST calipers (with a rebuild kit) and they take the bigger 296mm rotor so thanks anyway. Fitting under the rims isn't the problem, it's the rim clearing the 4 pot caliper. Neither the Enkies, Volks or Monzas come close to touching the mounting surface & a spacer will put them out of the guards by +25mm due to the studs hitting the mating surface of the rim. How much were the DBA4000 rotors?

hey roger
just read through and didnt see anything relating to your diff ratio
just wondering what your running in that respect?

cheers

DoNkEyCoNn wrote:hey roger
just read through and didnt see anything relating to your diff ratio
just wondering what your running in that respect?

cheers

It's a Bluey TRX one which is a 3.9.

big difference between the 3.7 and 3.9?
with the g/box you said the bellhousing bolted up, did you have to mod the tail shaft and mounts to get it to fit?

DoNkEyCoNn wrote:big difference between the 3.7 and 3.9?
with the g/box you said the bellhousing bolted up, did you have to mod the tail shaft and mounts to get it to fit?

I've always had a 3.9 so I don't know any different. The FJ20 gearbox is the same length as the CA20 one so no mods required other than the front housing.